Some websites illegally modify your registry editor and set their website as default home page, for stop this,
1. Right-click on the Internet Explorer icon on your desktop and select "Properties".
2. In the "Target" box you will see "C:\Program Files\Internet
Explorer\IEXPLORE.EXE".
3. Now by adding the URL of the site to the end of this it overrides any
Homepage setting in internet options:
"C:\Program Files\Internet Explorer\IEXPLORE.EXE" www.google.com
Showing posts with label Tricks. Show all posts
Showing posts with label Tricks. Show all posts
Monday, 24 May 2010
Kill Microsoft Instant Messenger(MSN)
This will remove Microstufts Instant Messenger (MSN). This wotked in WinXP Pro, but may work on others....
So, go to START-->RUN copy and paste the following:
QUOTE
RunDll32 advpack.dll,LaunchINFSection %windir%\INF\msmsgs.inf,BLC.Remove
Clink ok. No more msn process lwink.gif
So, go to START-->RUN copy and paste the following:
QUOTE
RunDll32 advpack.dll,LaunchINFSection %windir%\INF\msmsgs.inf,BLC.Remove
Clink ok. No more msn process lwink.gif
Thursday, 20 May 2010
BIOS Passwords Hacks.
To perform this hack you will need:
• A #1 or #2 Phillips-head screwdriver, or (less likely) a T-15 TORX driver or a 1/4" hex nutdriver, to open the case
• Needle-nosed pliers if you are working with jumpers
• A small flashlight or headlamp
With tools at hand, perform the following steps:
1. Turn the PC off (this means a total shutdown, not merely standby or hibernate mode) and disconnect the AC power cord.
2. Remove the cover from your system (this step may require tools, undoing a thumbscrew, or flipping a latch or two).
3. Refer to the user manual for the motherboard to find out how to "reset CMOS" memory. You may also find a label for specific jumper or switch settings marked on the system board.
4. Change the switch setting or jumper position to a specific position or remove the jumper entirely as prescribed in the manual to clear or reset the CMOS memory.
5. Wait 20-30 seconds for the memory to clear out from lack of power.
6. After 20-30 seconds put the switch or jumper the way it was before for normal use.
7. Reconnect the power cord and start up the system to see if the settings have changed to defaults.
8. Shut the PC down, disconnect the power cord, replace the cover, reconnect the power, and power up the PC.
9. Enter the BIOS setup program to configure the system as needed. This may include setting the date and time, selecting disk drive parameters, and selecting which devices the system uses to boot up with first.
If your system does not have a "reset CMOS" jumper or switch , the only option is to locate and remove the coin-style battery cell (or on some very old PCs, the battery pack), as shown in , that provides the power to the CMOS memory.
• A #1 or #2 Phillips-head screwdriver, or (less likely) a T-15 TORX driver or a 1/4" hex nutdriver, to open the case
• Needle-nosed pliers if you are working with jumpers
• A small flashlight or headlamp
With tools at hand, perform the following steps:
1. Turn the PC off (this means a total shutdown, not merely standby or hibernate mode) and disconnect the AC power cord.
2. Remove the cover from your system (this step may require tools, undoing a thumbscrew, or flipping a latch or two).
3. Refer to the user manual for the motherboard to find out how to "reset CMOS" memory. You may also find a label for specific jumper or switch settings marked on the system board.
4. Change the switch setting or jumper position to a specific position or remove the jumper entirely as prescribed in the manual to clear or reset the CMOS memory.
5. Wait 20-30 seconds for the memory to clear out from lack of power.
6. After 20-30 seconds put the switch or jumper the way it was before for normal use.
7. Reconnect the power cord and start up the system to see if the settings have changed to defaults.
8. Shut the PC down, disconnect the power cord, replace the cover, reconnect the power, and power up the PC.
9. Enter the BIOS setup program to configure the system as needed. This may include setting the date and time, selecting disk drive parameters, and selecting which devices the system uses to boot up with first.
If your system does not have a "reset CMOS" jumper or switch , the only option is to locate and remove the coin-style battery cell (or on some very old PCs, the battery pack), as shown in , that provides the power to the CMOS memory.
Folder options
User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\
Explorer]
System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\
Explorer]
Value Name: NoFolderOptions
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = show options, 1 = hide options)
Explorer]
System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\
Explorer]
Value Name: NoFolderOptions
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = show options, 1 = hide options)
Sunday, 18 April 2010
Creating a desktop shortcut for locking your computer….
If you use your computer in an area where others may have access to it, and there are things on your system you would rather have kept confidential, locking your desktop when you leave the computer is an essential task. Here's a recipe for a desktop shortcut that will lock your computer in two easy clicks:
Right click on an empty area of the desktop and choose 'new' then 'shortcut.' The create shortcut wizard will open; in the first text box, type '%windir%\System32\rundll32.exe user32.dll,LockWorkStation' and then give your shortcut an appropriate name on the next page, and hit 'finish.'
You will notice that the shortcut you created has a blank icon. To select a more appropriate one, right click on the shortcut and hit 'properties.' In the 'shortcut' tab, click the 'change icon' button.
In the 'look for icons in this file' box, type '%SystemRoot%\system32\SHELL32.dll' then click 'ok' to see a range of icons for your new shortcut. Choose an appropriate icon. Your desktop locking shortcut is now ready for use. Test it out.
it is useful if u have an account as it will prompt 4 a password....
Right click on an empty area of the desktop and choose 'new' then 'shortcut.' The create shortcut wizard will open; in the first text box, type '%windir%\System32\rundll32.exe user32.dll,LockWorkStation' and then give your shortcut an appropriate name on the next page, and hit 'finish.'
You will notice that the shortcut you created has a blank icon. To select a more appropriate one, right click on the shortcut and hit 'properties.' In the 'shortcut' tab, click the 'change icon' button.
In the 'look for icons in this file' box, type '%SystemRoot%\system32\SHELL32.dll' then click 'ok' to see a range of icons for your new shortcut. Choose an appropriate icon. Your desktop locking shortcut is now ready for use. Test it out.
it is useful if u have an account as it will prompt 4 a password....
Saturday, 17 April 2010
BIOS Passwords Hacks
Hello Friends,
To perform this hack you will need:
• A #1 or #2 Phillips-head screwdriver, or (less likely) a T-15 TORX driver or a 1/4" hex nutdriver, to open the case
• Needle-nosed pliers if you are working with jumpers
• A small flashlight or headlamp
With tools at hand, perform the following steps:
1. Turn the PC off (this means a total shutdown, not merely standby or hibernate mode) and disconnect the AC power cord.
2. Remove the cover from your system (this step may require tools, undoing a thumbscrew, or flipping a latch or two).
3. Refer to the user manual for the motherboard to find out how to "reset CMOS" memory. You may also find a label for specific jumper or switch settings marked on the system board.
4. Change the switch setting or jumper position to a specific position or remove the jumper entirely as prescribed in the manual to clear or reset the CMOS memory.
5. Wait 20-30 seconds for the memory to clear out from lack of power.
6. After 20-30 seconds put the switch or jumper the way it was before for normal use.
7. Reconnect the power cord and start up the system to see if the settings have changed to defaults.
8. Shut the PC down, disconnect the power cord, replace the cover, reconnect the power, and power up the PC.
9. Enter the BIOS setup program to configure the system as needed. This may include setting the date and time, selecting disk drive parameters, and selecting which devices the system uses to boot up with first.
If your system does not have a "reset CMOS" jumper or switch , the only option is to locate and remove the coin-style battery cell (or on some very old PCs, the battery pack), as shown in , that provides the power to the CMOS memory.
To perform this hack you will need:
• A #1 or #2 Phillips-head screwdriver, or (less likely) a T-15 TORX driver or a 1/4" hex nutdriver, to open the case
• Needle-nosed pliers if you are working with jumpers
• A small flashlight or headlamp
With tools at hand, perform the following steps:
1. Turn the PC off (this means a total shutdown, not merely standby or hibernate mode) and disconnect the AC power cord.
2. Remove the cover from your system (this step may require tools, undoing a thumbscrew, or flipping a latch or two).
3. Refer to the user manual for the motherboard to find out how to "reset CMOS" memory. You may also find a label for specific jumper or switch settings marked on the system board.
4. Change the switch setting or jumper position to a specific position or remove the jumper entirely as prescribed in the manual to clear or reset the CMOS memory.
5. Wait 20-30 seconds for the memory to clear out from lack of power.
6. After 20-30 seconds put the switch or jumper the way it was before for normal use.
7. Reconnect the power cord and start up the system to see if the settings have changed to defaults.
8. Shut the PC down, disconnect the power cord, replace the cover, reconnect the power, and power up the PC.
9. Enter the BIOS setup program to configure the system as needed. This may include setting the date and time, selecting disk drive parameters, and selecting which devices the system uses to boot up with first.
If your system does not have a "reset CMOS" jumper or switch , the only option is to locate and remove the coin-style battery cell (or on some very old PCs, the battery pack), as shown in , that provides the power to the CMOS memory.
Automatically run programs when starting Windows
Hello Friends,
If there are applications or commands that you run every single time you start your computer (Email comes to mind) you may want to consider setting things up so that these programs run automatically during the Windows XP startup. This can be done quite easily in XP by creating shortcuts and shuffling them around.
Here's how: Windows XP has a startup folder located at 'C:\ Documents and Settings\ (your user name)\ Start Menu\ Programs\Startup.' Shortcuts placed into this folder will be run automatically when Windows XP starts up.
If you already have shortcuts for the programs you desire to use, copy and paste them into the startup folder. Otherwise, go to 'start\programs,' select the program you would like to create a shortcut for, right click it and select 'send to' then 'desktop.' This will create a shortcut on the desktop that you can then use.
If there are applications or commands that you run every single time you start your computer (Email comes to mind) you may want to consider setting things up so that these programs run automatically during the Windows XP startup. This can be done quite easily in XP by creating shortcuts and shuffling them around.
Here's how: Windows XP has a startup folder located at 'C:\ Documents and Settings\ (your user name)\ Start Menu\ Programs\Startup.' Shortcuts placed into this folder will be run automatically when Windows XP starts up.
If you already have shortcuts for the programs you desire to use, copy and paste them into the startup folder. Otherwise, go to 'start\programs,' select the program you would like to create a shortcut for, right click it and select 'send to' then 'desktop.' This will create a shortcut on the desktop that you can then use.
AUTO DELETE TEMPORARY FOLDER.!!
hello Friends,
First go to start --> run --> type "gpedit.msc" (without quotes..)
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.
First go to start --> run --> type "gpedit.msc" (without quotes..)
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.
RENAME RECYCLE BIN
To change the name of the Recycle Bin desktop icon, click Start then goto Run, write Regedit and press Enter. It opens Registry Editor. Now in Registry Editor go to:
HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}
and change the name "Recycle Bin" to whatever you want (don't type any quotes).
HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}
and change the name "Recycle Bin" to whatever you want (don't type any quotes).
21 Tips 4 increasing XP performance.
Hello Freiends,
Here are some tricks that increase your xp performance.so Try this tricks
1] Your Pc Must have 256MB RAM , 512 MB Cache , Intel Pentium 4 Processor, 40 GB HDD. These are the minimum requirements.
2] If you see a 'virtual memory low' message then increase its virtual memory. To increase virtual memory,
Go to My Computer->Properties->Advanced->Performance Settings->Advanced->Virtual Memory->Change->Select the appropriate drive->Custom size->set appropriate level(our it is 600(min.) & 700(max.)->Ok.
3] Increase 'Visual Performance'. Go to My Computer->Properties->Advanced->Performance Settings->Visual Settings->Custom->Select only the following options.
a)Slide taskbar buttons.
b)Smooth edges of screen fonts.
c)Smooth-scroll list boxes.
d)Use a background image for each folder type.
e)Use visual style on windows and buttons.
4] Don't keep unwanted/extra fonts. To remove extra fonts, Go to Start->Settings->Control Panel->Fonts.
5] Your Desktop Wallpaper & Screensaver consume a large amount of disk space. Select the 'None' option for both wallpapers & Screensavers.
6] Avoid keeping DEMO Games.
7] Uninstall the unwanted Softwares.
8] Use Registry Cleaner to keep your registry clean(without errors).
9] Try to keep Music and pictures files in the folder specified by windows itself.
10]Use Hybernating Option for Quick windows start. To active Hybernating follow the following steps.
Desktop->Properties->Screensaver->Power->Hybernating->Enable Hybernating->Ok.
11] Keep your Dektop clean with unwanted icons.
12] Use Intel Application Accelerator to speed up your disk access,
13] Memory management (at least 512MB RAM Required). This allow XP to keep data in Memory instead of paging section of RAM.
Go to->Start->Run->regedit->HKEY_LOCAL_MACHINE->SYSTEM->CurrentControlSet->Control->Session Manager->Memory Management->Double click it->DisablePageingExecutive->Double Clik it->Set value to 1.
14] Disable Yahoo Messenger, Google Talk, and other unwanted programs from startup. (You can use registry editior to do this.). Because they do not appear in normal Startup Option.
15] Disable indexing files service (only if you do not use search option regularly). To do this follow the following steps.
Go to My Computer->Select the drive for which you want to disable the indexing service->Properties->Unselect 'Allow Indexing Service'->Ok.
16] For Windows XP, You must use NTFS partition. FAT partition is less supportive for Windows XP.
17] In BIOS, Select first booting device as your HDD.
18] Setting Priority High for a particular program.
Open Task Manager->Processes->Select the desired Program->Right Click->Set Priority->High->Ok.
This Priority set if for current session. Once you restart your system then its priority will again be Normal.
19] Keep deleting your Temporary Internet Files in regular intervals.
Go to Windows Drive (c: or d:)->Select the User->Local Settings->Temporary Internet Files
20] Empty your browser's cache in regular intervals.
21] Avoid keeping Movies in your PC.
Reply
Here are some tricks that increase your xp performance.so Try this tricks
1] Your Pc Must have 256MB RAM , 512 MB Cache , Intel Pentium 4 Processor, 40 GB HDD. These are the minimum requirements.
2] If you see a 'virtual memory low' message then increase its virtual memory. To increase virtual memory,
Go to My Computer->Properties->Advanced->Performance Settings->Advanced->Virtual Memory->Change->Select the appropriate drive->Custom size->set appropriate level(our it is 600(min.) & 700(max.)->Ok.
3] Increase 'Visual Performance'. Go to My Computer->Properties->Advanced->Performance Settings->Visual Settings->Custom->Select only the following options.
a)Slide taskbar buttons.
b)Smooth edges of screen fonts.
c)Smooth-scroll list boxes.
d)Use a background image for each folder type.
e)Use visual style on windows and buttons.
4] Don't keep unwanted/extra fonts. To remove extra fonts, Go to Start->Settings->Control Panel->Fonts.
5] Your Desktop Wallpaper & Screensaver consume a large amount of disk space. Select the 'None' option for both wallpapers & Screensavers.
6] Avoid keeping DEMO Games.
7] Uninstall the unwanted Softwares.
8] Use Registry Cleaner to keep your registry clean(without errors).
9] Try to keep Music and pictures files in the folder specified by windows itself.
10]Use Hybernating Option for Quick windows start. To active Hybernating follow the following steps.
Desktop->Properties->Screensaver->Power->Hybernating->Enable Hybernating->Ok.
11] Keep your Dektop clean with unwanted icons.
12] Use Intel Application Accelerator to speed up your disk access,
13] Memory management (at least 512MB RAM Required). This allow XP to keep data in Memory instead of paging section of RAM.
Go to->Start->Run->regedit->HKEY_LOCAL_MACHINE->SYSTEM->CurrentControlSet->Control->Session Manager->Memory Management->Double click it->DisablePageingExecutive->Double Clik it->Set value to 1.
14] Disable Yahoo Messenger, Google Talk, and other unwanted programs from startup. (You can use registry editior to do this.). Because they do not appear in normal Startup Option.
15] Disable indexing files service (only if you do not use search option regularly). To do this follow the following steps.
Go to My Computer->Select the drive for which you want to disable the indexing service->Properties->Unselect 'Allow Indexing Service'->Ok.
16] For Windows XP, You must use NTFS partition. FAT partition is less supportive for Windows XP.
17] In BIOS, Select first booting device as your HDD.
18] Setting Priority High for a particular program.
Open Task Manager->Processes->Select the desired Program->Right Click->Set Priority->High->Ok.
This Priority set if for current session. Once you restart your system then its priority will again be Normal.
19] Keep deleting your Temporary Internet Files in regular intervals.
Go to Windows Drive (c: or d:)->Select the User->Local Settings->Temporary Internet Files
20] Empty your browser's cache in regular intervals.
21] Avoid keeping Movies in your PC.
Reply
Changing Yahoo-Messenger Look's :
1) Open C:\Program Files\Yahoo!\Messenger , make new folder in this folder Messenger
2) Copy the file res_msgr.dll from Messanger and paste it into the new folder as backup.
3) search "ResHacker" or "ResEditInstalL.exe" software on ur pc.
4)Run this software & open C:\Program Files\Yahoo!\Messenger\res_msgr.dll file.
5) Open folders in following sequence :
Icon -> 1
6) Right click on file '1033' and select file '278' in the new window just appeared.
7) Click the button 'Open file with new icon...' & open any one of the icon file which i have
attached with the attachment.
8) Click the 'Replace Button' & Press ctr+ S to save the file.
9) In similar fashion change the file '572' at the same location with the other icon file which i
mailed u.
10 ) Save the file and close everything.
11) Open yahoo messenger and notice the ch
2) Copy the file res_msgr.dll from Messanger and paste it into the new folder as backup.
3) search "ResHacker" or "ResEditInstalL.exe" software on ur pc.
4)Run this software & open C:\Program Files\Yahoo!\Messenger\res_msgr.dll file.
5) Open folders in following sequence :
Icon -> 1
6) Right click on file '1033' and select file '278' in the new window just appeared.
7) Click the button 'Open file with new icon...' & open any one of the icon file which i have
attached with the attachment.
8) Click the 'Replace Button' & Press ctr+ S to save the file.
9) In similar fashion change the file '572' at the same location with the other icon file which i
mailed u.
10 ) Save the file and close everything.
11) Open yahoo messenger and notice the ch
Monday, 29 March 2010
Create Temporary Email ID's
Hello Friends,
want to Create Temporary Email ID's which lasts only for
3hrs,6hrs,12hrs or for just 24 hours with
www.meltmail.com
The ID is self destructible.
want to Create Temporary Email ID's which lasts only for
3hrs,6hrs,12hrs or for just 24 hours with
www.meltmail.com
The ID is self destructible.
Orkut Tricks
Hello Friends,
Do you want to Posting blank scrap on Orkut:
*Open any scrapbook.
*Write [i] in d scrapbk.
*Don't write anythng else in the scrapbk & submit the scrap. OK
Do you want to Posting blank scrap on Orkut:
*Open any scrapbook.
*Write [i] in d scrapbk.
*Don't write anythng else in the scrapbk & submit the scrap. OK
How to Disable/Enable System Restore in Windows Vista
How to Disable/Enable System Restore in Windows Vista:
Start Menu> All Programs> Accessories> System Tools> System Restore
Start Menu> All Programs> Accessories> System Tools> System Restore
Samsung MOBILE SECRETS
Hello Friends, Samsung MOBILE SECRETS:
*#9125#
Activates the smiley when charging
*#9998*228#
Shows Battery status
*#9998*778#
SIM Service Table
*#9125#
Activates the smiley when charging
*#9998*228#
Shows Battery status
*#9998*778#
SIM Service Table
Tuesday, 23 March 2010
Restore / Add Desktop Icon To Quick Launch Area
Hello friends,
If you are deleted the desktop icon from quick launch area and now you want to retrive the desktop icon again
For This you have download a VBS Script and click on it .you will receive a msg "Toolbar Menu's have been restored." click Ok and you are done.
Or paste the below text in notepad
and save as restoreshowdesktop.vbs
Dim myShell
Set myShell = CreateObject("WScript.Shell")
myShell.Run("regsvr32 /n /i:U shell32")
Set myShell = Nothing
MsgBox "Toolbar Menu's have been restored.", 4096,"Finished"
keyboard Shortcuts to show the desktop is "WIN+D"Set myShell = CreateObject("WScript.Shell")
myShell.Run("regsvr32 /n /i:U shell32")
Set myShell = Nothing
MsgBox "Toolbar Menu's have been restored.", 4096,"Finished"
Monday, 22 March 2010
how to check your antivirus alive or dead
Hello Friends,
Is your computer safe from virus ?...if you are doubt ful use the following code Check if your antivirus is alive or dead...!
Open notepad and paste this:
X5O!P%@AP[4\PZX54(P^)7CC)7}$
Save it as eicar.com. The Anti-Virus should stop you (if it does that means its working).
Don't worry about it. European Institute for Computer Anti-virus Research (EICAR) have got people to program Anti-Virus to recognise this as a threat (even tough it's completely harmless)...
Is your computer safe from virus ?...if you are doubt ful use the following code Check if your antivirus is alive or dead...!
Open notepad and paste this:
X5O!P%@AP[4\PZX54(P^)7CC)7}$
Save it as eicar.com. The Anti-Virus should stop you (if it does that means its working).
Don't worry about it. European Institute for Computer Anti-virus Research (EICAR) have got people to program Anti-Virus to recognise this as a threat (even tough it's completely harmless)...
Sunday, 21 March 2010
How To Recover Deleted Files
Hello Friends,
If you have lost important files from your hard drive and if you are sure that they have been deleted, don’t panic! Uneraser is simple software that can help. In this tutorial, we will see how Uneraser works. On this link you can download Uneraser.
For example, I delete movie file on Local Disk (E:) , how to recover movie file?. It is simple
1. Run Uneraser , then select wizard , as shown below
2. When the wizard appears select “Do a lost files scan”, then click Next , as shown below
3. Select partition , where is deleted data, then click Next
4. Uneraser find my deleted movie
5. Now, just save your recover file, as shown below
If you have lost important files from your hard drive and if you are sure that they have been deleted, don’t panic! Uneraser is simple software that can help. In this tutorial, we will see how Uneraser works. On this link you can download Uneraser.
For example, I delete movie file on Local Disk (E:) , how to recover movie file?. It is simple
1. Run Uneraser , then select wizard , as shown below
2. When the wizard appears select “Do a lost files scan”, then click Next , as shown below
3. Select partition , where is deleted data, then click Next
4. Uneraser find my deleted movie
5. Now, just save your recover file, as shown below
Use Keyboard As Mouse
Hello Friends,
When mouse isn’t working properly , this trick can be very helpful. To activate mouse keys all you do is press Alt+Left shift key + NumLock and click OK or press enter .
Use the Numerical pad for controlling the mouse pointer.
5 is for click.
+ is for double click
- for right click.
When mouse isn’t working properly , this trick can be very helpful. To activate mouse keys all you do is press Alt+Left shift key + NumLock and click OK or press enter .
5 is for click.
+ is for double click
- for right click.
Secret tips and tricks for Gsm mobile and cellphone
Hello Friends,
Here is the some secret tips for GSM Mobile and CellPhone.
Type *#61# and press call - Check call redirection status.
Cancel all redirections: ##002#
*43# to activate call waiting, to deactivate #43#.
If your phone doesn't have incoming call barring and outgoing call barring, you can try this. For outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial #33#barcode*#.
On any phone on any network type in **43# to enable conference calls. You can make up to 7 calls at once
If you need to block SMS reception (if you are spammed by someone) just press this code: *35*xxxx*16# xxxx is your Call Barring code (default is 0000). To remove this barring type: #35*xxxx#
If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call. (*#30# / *#31# or *31# / #31# ) Works on some networks.
Typing *0# or *nm# on the beginning of a txt message gives you detailed delivery report on some networks.. But turn off reports in message settings before.
When the sim card-pin blocked type
**042*pin2 old*newpin2*newpin2*
Here is the some secret tips for GSM Mobile and CellPhone.
Type *#61# and press call - Check call redirection status.
Cancel all redirections: ##002#
*43# to activate call waiting, to deactivate #43#.
If your phone doesn't have incoming call barring and outgoing call barring, you can try this. For outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial #33#barcode*#.
On any phone on any network type in **43# to enable conference calls. You can make up to 7 calls at once
If you need to block SMS reception (if you are spammed by someone) just press this code: *35*xxxx*16# xxxx is your Call Barring code (default is 0000). To remove this barring type: #35*xxxx#
If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call. (*#30# / *#31# or *31# / #31# ) Works on some networks.
Typing *0# or *nm# on the beginning of a txt message gives you detailed delivery report on some networks.. But turn off reports in message settings before.
When the sim card-pin blocked type
**042*pin2 old*newpin2*newpin2*
Subscribe to:
Posts (Atom)